A-605 Air Filter Kit for Magnehelic Gage

$36.95 -- Air filter kit - adapts any standard Magnehelic® gage for use as an air filter gage. Includes aluminum surface mounting bracket with screws, (2) 5 ft (1.5 m) lengths of 1/4" aluminum tubing, (2) static pressure tips & (2) molded plastic vent valves.

Purchase A-605 Air Filter Kit for Magnehelic Gage

SKU: A-605

Other products in the category Accessories / Dwyer Accessories:

475-AV Air Velocity Kit -- Convenient all-in-one Air Velocity Kit is small, light and easy to use. No set-up or leveling needed. Included is a 6" stainless steel Pitot tube with integral compression fitting to hold it securely when taking readings. Also, two static press

A-201 Tubing for Portable Digital Manometers -- Rubber tubing, 3/16" ID, 9 ft length. Use with Dwyer hand-held digital manometers: 475, 478A, 477, and 477A.

A-286 Panel Mount Flange for Magnehelic Gage -- A-286 Panel Mounting Flange for 4-1/2" Diameter Dwyer Magnehelic Gages      The new mounting flange can be used on any Dwyer Instruments, Inc. gage that possesses a 4-1/2" (115 mm) diameter housing. The flange is

A-298 Flat Flush Mount Bracket for Dwyer Capsuhelic -- Flat aluminum bracket for flush mounting Capsuhelic® gage

A-300 Flat Mounting Bracket for Magnehelic Gage

A-303 Portable Static Pressure Tip -- Portable static pressure tip for temporary insertion in ductwork. Magnet mount. For use with 3/16" ID tubing. Inserts through a small hole drilled in the side of duckwork. The magnetic mount holds the tip firmly in place.&n

A-308 Static Pressure Fitting for Magnehelic Gage -- A-308 Static pressure fitting for Dwyer magnehelic gauges. Hose barb Fits 3/16" and 1/8" ID plastic or rubber tubing.

A-309 3-Way Manifold Valve for Dwyer Capsuhelic -- A-309 3-Way Manifold Valve for Dwyer Capsuhelic gage

A-310A 3-Way Valve for Magnehelic Gage

A-314 Bleed Fitting for Dwyer Capsuhelic -- A-314 Bleed Fitting for Dwyer Capsuhelic gage. Affords easier, safer purging of trapped air when using a Capsuhelic® gage with liquids. Also useful for draining condensate when installed in lower ports. To open, simply loosesn the h

A-321 Safety Relief Valve for Magnehelic Gage

A-370 Mounting Bracket for Dwyer Capsuhelic -- A-370 Mounting bracket. First, flush-mount the Capsuhelic® gage in the bracket, then mount the bracket to a vertical surface. Steel with gray hammertone epoxy finish.

A-402A Zippered Carry Case for Digital Manometers -- Tough gray nylon pouch protects any Series 475, 476A, 478A, 477, 477A or 490 Dwyer Digital Manometer . Double zippered for quick and easy access. With belt loop that snaps closed. Dimensions: 7-1/2½H x 3½W x 2-1/4½D (191 x 76 x 57

A-432 Portable Kit for Magnehelic Gage

A-464 Flush Mount Kit for Magnehelic Gage -- The A-464 Mounting Kit provides a flush mounting solution for Magnehelic® gage installations for applications such as clean rooms and mechanical equipment rooms. The A-464 can also be used as an alternative means to flush mount Magnehelic® gages

A-471Portable Kit for Dwyer Capsuhelic -- For portable operation, the A-471 Capsuhelic® Portable Gage Kit is available complete with tough polypropylene carrying case, mounting bracket, 3-way manifold valve, two 10' high pressure hoses, and all necessary fittings.

A-480 Plastic Static Pressure Tip -- Plastic static pressure tip for use with DigiMag DM-1000 series pressure and flow gauges.

A-481 Installer Kit -- Installer Kit, includes two plastic static pressure tips and 7 ft PVC tubing for use with DigiMag DM-1000 series pressure and flow gauges.

A-496 Heavy Duty Flush-Mount Bracket for Dwyer Capsuhelic -- A-496 Heavy Duty Flush-Mount Bracket for Dwyer Capsuhelic® gages. Use in high-shock or high vibration applications

A-605 Air Filter Kit for Magnehelic Gage

A-610 Pipe Mounting Kit for Dwyer Gages -- Conplete bracket assembly for permanently mounting Dwyer Magnehelic® and Capsuhelic® gages to pipes from 1-1/4" to 2" diameter.

A-630 SS Angle Bracket -- Stainless steel angle type bracket with stainless steel bolts for mounting Dwyer 3100 series Explosion-Proof Differential Pressure Transmitters.

A-631 SS Flat Bracket -- Stainless steel flat type bracket with stainless steel bolts for mounting Dwyer 3100 series Explosion-Proof Differential Pressure Transmitters.

-B Brass Case option for Dwyer Capsuhelic water application -- Brass Case for Dwyer Capsuhelic gage. Required for water and water-based liquids.

BBV-1F Flanged 3-valve block manifold -- BBV-1F Flanged 3-valve Block Manifold for Dwyer 3100 Series Explosion-Proof Differential Pressure Transmitters.     The series BBV-1 Block Manifold can be used over a broad range of industrial applications including oil refine

BBV-22F Flanged 5-valve block manifold -- BBV-22F Flanged 5-valve Block Manifold for Dwyer 3100 Series Explosion-Proof Differential Pressure Transmitters. Series BBV-2 Block and Bleed Manifold is ideal for use over a broad

DM-1200 Air Flow Option for DigMag Gage -- The airflow option enables the Dwyer DigiMag DM-1000 differential pressure gage to report air velocity and volumentric flow.Air velocity and flow readings are based upon standard dry air conditions with an ambient temperature of 70°F and a barometr