Advanced Search     
 
 Airflow Meters
Tracer Smoke
Thermometers
Thermal Imagers
Hygrometers
Moisture Meters
Light Meters
Data Loggers
Gas Detectors
Pressure Meters
Sound Meters
Tachometers
Scales
Water Quality
MeterMall USA

MC6 Multi-Cal Pressure Calibrator, Benchtop

$3,149.00 -- Benchtop Pressure Calibrator, +/-0.05% accuracy, Datalogging, NIST Traceable

Purchase MC6 Multi-Cal Pressure Calibrator, Benchtop

MC6 Multi-Cal Pressure Calibrator from Dwyer Instruments.  Benchtop pressure calibrator.  NIST traceable.

MC6 Pressure Calibrator Dimensional Drawing

Model MC6 Multi-Cal Benchtop Calibrator performs a wide variety of simple and complex pressure based measurement, test, and calibration operations. Modular sensor design allows user to select pressure measurement range for application flexibility. Calibrator can accommodate up to two interchangeable pressure modules (sold separately) in any combination of range or accuracy.

Simultaneously display two separate measurements on the two line, alphanumeric display. Readings can be displayed in a choice of twelve preprogrammed engineering units or any single user-defined unit. Calibrator features min/max recall, hi/lo alarm, percentage of full scale pressure readings, mA/voltage measurement, leak rate and pressure decay measurement, switch testing capabilities, including trip point and dead band, and velocity/volume flow rates.

Quickly document calibration procedures using the data logging feature which stores up to 384 sets of pressure and time/date stamped measurements. The automatic % error calculation simplifies transmitter calibration. Easily upload stored data to an IBM compatible computer via the RS232 two-way communications port. Calibrators and modules include certification to NIST traceability--ideal as a secondary standard for calibrating pressure equipment.

Multi-Cal Pressure Calibrator includes utility software, protection module, adjustment handle, AC adapter, and instruction manual.

Multi-Cal Pressure Modules are interchangeable and available in a wide selection of pressure ranges and accuracies. Dwyer pressure calibrators Mc and MC6 accept up to two pressure modules. Modules include NIST calibration certification.Modules are sold separately.  See Below.  Contact us for other pressure ranges and accuracies.  FM-approved models are also available.

Applications:

� Clean Room Control
� Filter Performance Monitoring
� HVAC Testing and Setup
� Draft Measurement
� Airflow Measurement Control
� Differential Pressure Measurement in Laminar Flowhoods
� Paint Booths
� Industrial Ovens and Fume Hoods
� Use as a Secondary Standard for Calibrating Pressure Equipment


Specifications of MC6 Multi-Cal Pressure Calibrator

Service: Clean, dry, nonconductive, noncorrosive gases.
Accuracy: Differential Pressure Modules: �0.06% FS, Gauge Pressure Modules: �0.05% FS, Voltage Input: �0.025% FS @ 1/10 VDC, �0.10% FS @ 0/30 VDC, Current Input: �0.03% FS @ 1/20 mA, �0.05% FS @ 0/50 mA.
Sensitivity: �0.002% of span with dampening 1 part in 50,000 (max.).
Repeatability: Ranges ≤0/2 psi: �0.05% of span, Ranges ≥0/5 psid: �0.02% of span.
Output: RS232 serial interface, 9-pin.
Alarm Output: SPST form C 110 VDC, 120 VDC (max.), 1 A (mas.), 30 W, 62.5 VA (resistive).
Display: Alphanumeric LCD, 0.37" (9.5 mm) height per line, 2 lines, 16 characters/line.
Display Update: 100 msec.
Ambient Operation Temperature: 32 to 120�F (0 to 49�C).
Storage Temperature: -4 to 158�F (-20 to 70�C).
Electrical Connections: Starndard banana jacks.
Power Supply: Internal: two 9 VDC alkaline batteries,External: AC adapter 9 VDC, 500 mA.
Battery Life: 30 hours (approximate).
Engineering Units: In H2O, psi, in Hg, kPa, mbar, bar, cm H2O, mm Hg, ft SW, MPa, mm H2O, kg cm� and user-defined.
Overpressure: Differential Pressure Modules: 50 psi positive direction, 15 psi negative direction, Gauge Pressure Modules: 2x range (0/5 psi to 0/1000 psi).
Temperature Compensation: 20 to 120�F (-7 to 49�C).
Temperature Error: Maximum of �0.004% of span per �F over compensated range for zero and span.
Temperature Effect Electrical Measurement: �0.001% of span per �F over compensated range.
Dampening: (Measurement averaging) programmable from 0 to 16 consecutive readings.
Baud Rate: 300, 1200, 2400, or 9600, selectable.
Computer Requirements: IBM compatible 386 or above and Windows� 3.1 or later with 2MB RAM and 2MB hard drive disk space, one serial port.
Housing Material: ABS plastic.
Weight: Calibrator: 3 lb (1.4 kg); Pressure Module: 0.5 lb (0.3 kg).
Agency Approvals: CE

Order Pressure Modules Below

Purchase MC6 Multi-Cal Pressure Calibrator, Benchtop

Other products in the category Pressure Meters / Pressure Calibrators:

MC Multi-Cal Pressure Calibrator from Dwyer Instruments.  Hand held pressure calibrator.  NIST traceable. MC Multi-Cal Pressure Calibrator, Hand Held -- MC Pressure Calibrator User ManualMC Pressure Calibrator Dimensional Drawing Series MC Portable Multi-Cal Pressure Calibrator from Dwyer Isntruments performs a wide variety of simple and complex pressure based measurement . . .

Pressure Modules for MC Multi-Cal Pressure Calibrator from Dwyer Instruments MC Multi-Cal Pressure Modules -- MC Multi-Cal Pressure Modules are designed for use with the Dwyer Instruments MC Handheld Pressure Calibrator or the MC6 Benchtop Pressure Calibrator.  Modules are interchangeable and available in a wide selection of pressure ranges and accuracies. . . .



Accessories

Pressure Modules for MC Multi-Cal Pressure Calibrator from Dwyer Instruments MC Multi-Cal Pressure Modules





Home | Air Flow / Anemometers | Water Quality Meters | Pressure Meters | Gas Detectors | Accessories | Shop by BRAND | Hygrometers | Thermometers | Moisture Meters | Particle Counters | Data Loggers | Vibration Meters | Air Flow / Tracer Smoke | Thermal Imaging Cameras | Light Meters | Sound Meters | Tachometers & Strobosopes





instruments that measure and datalog temperature, humidity, airflow, pressure, gases, light, RPM, pH, weight, water quality, weather
MeterMall USA Shopping Cart Software by Nexternal